manualshive.com logo in svg

Oceanic OC1, Operating Manual, Page: 14 / 180

Share
Download
Oceanic OC1 Operating Manual Download Page 14

14

MENU SYSTEM

The Dot Matrix located in the middle of the LCD viewing area is 

used to display alpha numeric messages and measured values 

as well as Menu type systems for selection of settings and vari-

ous auxiliary functions.  It also serves as the Digital Compass 

which can be accessed during operation in any mode.

There are 10 Menus that include the -

•  Watch Menu

•  Set Time Menu

•  NORM Menu

•  GAUG Menu

•  FREE Menu

•  Compass Menu

•  Set F Menu

•  Set A Menu

•  Set U Menu

•  Set TMT Menu

Each Menu has a Start (First) selection and a Stop (Last) selec-

tion.  Upon entering a Menu, movement through it starts at the 

Start (First) selection, then continues in a rolling manner down 

the screen showing selections in groups of 3.  

•  The sample at the right shows how a menu would look if all 

of the selections would be displayed on one screen.    

FREE

MENU

SEL

>

CDT

SET EDT AL

SET DD 1 AL

SET DD 2 AL

SET DD 3 AL

DIVE MODE

Sample Menu

(all selections shown)

Summary of Contents for OC1





















































































































































































Reviews:

No comments