Oceanic OC1 Operating Manual Download

Page: 32 / 180

Default Time,

information includes (Fig. 8):

> Time of Day (hr:min:sec), Home (or Alternate if selected)

> Day of Week graphic MON, TUE, WED, THU, FRI, SAT, or

SUN

> Graphic ALT, if Alternate Time is selected as Default

> Month.Day (or Day.Month)

> Battery icon, if a Low Battery

> Alarm (speaker) icon, if Daily Alarm is set On

> TLBG, if any after NORM/FREE dives

• A < 2 sec to access Watch ALTs

• M < 2 sec to access Watch Menu

• M 2 sec to access DC (Dive Computer) Mode

• S < 2 sec to silence Daily Alarm

• S 2 sec to access Compass

• L (on closure) to activate Backlight

Alt 1,

information includes (Fig. 9):

> Time of Day (hr:min:sec), Alternate (or Home if selected)

> Day of Week graphic MON, TUE, WED, THU, FRI, SAT, or

SUN

> Graphic ALT, blank if Home Time is displayed

> Month.Day (or Day.Month)

> Battery icon, if a Low Battery

> Alarm (speaker) icon, if Daily Alarm is set On

> TLBG, if any after NORM/FREE dives.

Fig. 8 - DEFAULT TIME

Fig. 9 - WATCH ALT 1

Summary of Contents for OC1





















































































































































































Search results

Summary of Contents for OC1

Reviews:

Related manuals for OC1

Brands by name

Popular brands

Oceanic OC1, Operating Manual

Search results

Summary of Contents for OC1

Reviews:

Related manuals for OC1

Brands by name

Popular brands