Using the ADC1000-USB: Serial Mode
Configuring the Spectrometer
The following section provides information on configuring your spectrometer and setting system
parameters:
Open the Spectrometer Configuration Screen
Select
Spectrometer > Configure
from the menu bar. The Spectrometer Configuration screen
appears:
A/D Interface Tab
Enter the same values as you did in the Configure Hardware dialog box (see the
Configure the
OOIBase32 Software – Serial Port
section for more information).
ADC1000-USB Operating Instructions
12
When you exit OOIBase32, this data is stored in the
.spec
file.
