Oce TDS600 User Manual Download Page 59

Page: 59 / 338

Use the Océ TDS600 to scan

▼

Switch the Océ TDS600 scanner on

Set the on/off switch at the front of the scanner to position ‘1’., (see figure 24).
The green LED will be on.

The message ’Ready to copy’ appears.

▼

Switch the Océ Power Logic controller on

Press the on/off button on the controller, (see figure 25).

Press the on/off button on the monitor.
The controller starts up.

Switch the Océ TDS600 scanner off

▼

Switch the Océ TDS600 scanner off

Set the on/off switch at the front of the scanner to position ‘0’.

▼

Switch the Océ Power Logic controller off

Select the ‘Shut down’ option from the Océ System Control Panel.

Switch off the controller and the monitor (see figure 25).

Wait at least 5 seconds before you restart the Océ TDS600.

Summary of Contents for TDS600



















































































































































































































































































































































Search results

Summary of Contents for TDS600

Reviews:

Brands by name

Popular brands

Oce TDS600, User Manual

Search results

Summary of Contents for TDS600

Reviews:

Brands by name

Popular brands