Oce TDS600, User Manual

Page: 51 / 338

Use the Océ TDS600 to copy 51
[18] Selecting the zoom factor
Note:
You can also select the zoom factor from the ‘Custom’ section (if this
setting has been defined for this).
Select the exposure
You can use the ‘Exposure’ setting to correct for a lighter or darker original.
▼ ▼ ▼ ▼
Selecting the exposure setting
1
Select the ‘Image’ card in the ‘Original’ section.
2
Select the desired exposure level by using the Arrow buttons to the right of the
display (see figure 10 on page 41).
[19] Selecting the exposure level
Note:
You can also select the exposure level from the ‘Custom’ section (if this
setting has been defined for this).
Access to
ial Access to
Page
Interrupt
job
Access to
ial Access to
Page
Interrupt
job