Oce TDS600, User Manual

Page: 240 / 338

240 Océ TDS600 Multifunctional Digital System User Manual
Media
The Océ TDS600 is available in many configurations, ranging from two rolls
in a single drawer, four rolls in two drawers plus three sheet feeders and a
maximum of six rolls with one sheet feeder.
Note:
Contact your Océ representative if you want to know more about the
available configurations.
Each of the rolls and sheet feeders on the Océ TDS600 may be loaded with
print material of a different size or type. The size and type of the available
media are indicated on the operating panel.
Note:
In case you have three sheet feeders, no A4 size material and no A3
landscape material can be used in the bottom sheet feeder. The minimum size
of media in the third sheet feeder is A2.
Attention:
After loading new print material, you need to inform the system
of the size of the material and of the type of print material that was loaded
(paper, transparent, or polyester).
The definition of the size and type of the new print material is required to:
■
Enable the automatic media switch function to work correctly (see
‘Automatic roll switch’ on page 182)
■
Prevent folding errors (when a folder is installed)
■
Support autozoom and auto format functions.
Caution:
It is highly advisable to place heavy rolls (A0, A1, and 175 meter
rolls of plain paper) in position 1 of the top drawer, position 3 of the middle
drawer or position 5 of the bottom drawer, to minimize user strain. The
diameter of rolls should not exceed 185 mm.