Oce TDS600, User Manual

Page: 211 / 338

Océ Power Logic: Settings Editor (for the system administrator) 211
.
HPGL
Setting Description
Enable
HPGL The 'Enable' option allows you to enable or disable HPGL. In case
of problems with HPGL, the HPGL PDL can be disabled by select-
ing the 'Disabled' option.
Origin Use the 'Origin' option to define the HPGL origin settings of the
plot.
Select pen 0 If you enable the 'Select pen 0' option, the selection of pen 0 will
be interpreted as end of file (EOF). If the option is disabled, pen 0
will behave like a default HPGL pen.
Colour
merge con-
trol Use the 'Colour merge control' option to determine what should
happen when two or more colours intersect at the same point on a
plot, especially at the intersection of vectors or 'filled' polygons. If
the colour merge control is set to off, the colour of the last vector
or area fill overwrites the colours specified at the same crossing ar-
ea. White areas are considered opaque. If set to on, all colours are
blended together (merged) at the intersection of vectors and poly-
gons.
Pen width
scaling To enable or disable the pen width scaling.
If enabled: scaling an image will scale the pen width correspond-
ingly.
Kanji font
set To specify the correct font set for the files which contain Kanji
font.
HPGL-2
Setting Description
Enable
HPGL-2 The 'Enable' option allows you to enable or disable HPGL-2. In
case of problems with HPGL-2, the HPGL-2 PDL can be disabled
by selecting the 'Disabled' option
Origin Use the 'Origin' option to define the HPGL-2 origin settings of the
plot.
Select pen 0 If you enable the 'Select pen 0' option, the selection of pen 0 will
be interpreted as end of file (EOF). If the option is disabled, pen 0
will behave like a default HPGL-2 pen.
Colour
merge con-
trol Use the 'Colour merge control' option to determine what should
happen when two or more colours intersect at the same point on a
plot, especially at the intersection of vectors or 'filled' polygons. If
the Colour merge control is set to off, the Colour of the last vector
or area fill overwrites the colours specified at the same crossing ar-
ea. White areas are considered opaque. If set to on, all colours are
blended together (merged) at the intersection of vectors and poly-
gons.