Oce TDS600, User Manual

Page: 235 / 338

Océ Power Logic: Account logging 235
Receive time
hours num 2 Hour when source page was received. 0-23
Receive time
minutes num 2 Minute when source page was received. 0-59
Receive time
seconds num 2 Second when source page was received. 0-59
Source location text 255 Location of the input file or set:
For files in the input stream: F1 to F999 (for the
first until the 999
th
file in the input stream of this
job).
For referenced files: the URL of the file.
For scans, the input set number to which the page
belongs: S1 to S999 (for the first until the 999
th
in-
put set). Note: The Océ TDS600 only supports 1
input set.
Source page
number num 6 Page number of the input page in the source
set/file. First = 1
Source type text Type of the source page:
For PDL’s: TIFF, CALS, PDF, PS, NIRS, HPGL,
HPGL2, C4, CALCOMP, ASCII
For scans: SCANF (scan of front of page),
SCANB (scan of back of page)
Source width num 6 Native width of source page in points (1/72 inch)
Source height num 6 Native height of source page in points (1/72 inch)
Output width num 6 Actual width of output page in points (1/72 inch)
Output height num 6 Actual width of output page in points (1/72 inch)
Width scale num 4 The scaling factor applied to the original in the
width direction. In %.
Height scale num 4 The scaling factor applied to the original in the
height direction. In %.
Mirroring text 2 Mirroring applied to the original.
LR (left and right swapped) or TB (top and bottom
swapped). Empty if no mirroring applied.
Rotation angle num 3 Counter-clockwise rotation angle of the scaled
(and possibly mirrored) original. Possible values:
0, 90, 180, 270. An angle of 0 implies that the ori-
entation of the source and output image is the
same.