Oce TDS600, User Manual

Page: 325 / 338

Safety information 325
Note:
The contents of this safety data sheet is subject to the disclaimer on
page 316 of this manual.
MATERIAL SAFETY DATA SHEET
Number E-218-a-UK
(93/112/EEC and ISO 11014-1) Date April 1998
Page 2 of 2
Océ OPC Drum Part No. 2912571, Océ ES102 OPC Part No. 7069008
9. Physical and chemical properties
Explosion limits (dust explosion) LEL N.A. UEL N.A. Flash point (
o
C) N.A.
Appearance and odour brown coloured aluminium cylinder Ignition temperature (
o
C) N.A
Boiling point (
o
C) N.A Density (g/cm
3
) 2,7
Vapour density (air = 1) N.A. Melting point (
o
C) N.A.
Solubility in water Insoluble Evaporation rate (butyl acetate =1) N.A.
Vapour pressure N.A. % Volatile 0
Other characteristics N.A. pH (solution) N.A.
10. Stability and reactivity
Thermal decomposition None at intended use
Hazardous decomposition products None at intended use
Hazardous reaction None at intended use
11. Toxicological information
12. Ecological information
This product is not biodegradable.
The ingredients are not classi?ed as ecologically hazardous. No adverse environmental effects are expected.
13. Disposal considerations
The drum will be returned to Océ for re-use.
14. Transport information
This product is not classified as a dangerous substance according to the international transport regulations.
15. Regulatory information
This product is an article and contains no dangerous substances. Therefore, indications of special risks or safety advice on the packing are
not prescribed for this product.
16. Other information
Copyright © 1998 Océ-Technologies B.V. Venlo, NL
Use: photoconductor for printers and copiers.
Inhalation N.A.
Skin No adverse health effects are expected. (Based on toxicological literature on the ingredients of this product)
Eyes N.A.
Ingestion N.A.
Mutagenicity No mutagenicity detected in Ames test. None of the ingredients is listed as mutagenic or carcinogenic.