![background image](http://html2.mh-extra.com/html/oce/p2t/p2t_operation-manual_3218696007.webp)
Symbol
Type of symbol
Indicates
CAUTION
Laser beam
Indicates a caution concerning operations that may lead to in-
jury to persons if not performed correctly. To use the ma-
chine safely, always pay attention to these cautions.
IMPORTANT
Indicates an operational requirement or restriction. Read
these items carefully in order to prevent damage to equip-
ment, software, data, media, or property.
NOTE
Indicates a clarification of an operation or contains additional
explanations for a procedure. Reading these notes is highly
recommended.
Body protection symbols
This manual uses the following body protection symbols to indicate that it is important to protect
yourself before performing a specific task or action.
Symbol
Type of symbol
Indicates
IMPORTANT
Hand protection
Wear the mentioned type of gloves when you perform this
task or action.
IMPORTANT
Eye protection
Use the mentioned type of eye protection when you perform
this task or action.
IMPORTANT
Body protection
Wear the mentioned type of body protection when you per-
form this task or action.
IMPORTANT
Foot protection
Wear the mentioned type of safety footwear when you per-
form this task or action.
Notes for the reader
Chapter 1 - Preface
7
Summary of Contents for P2T
