Oce P2T, Operation Manual

Page: 12 / 62

Component Function
2 Empty the trim bin The trim bin collects the paper that is trimmed from the
edge of the book
If the booklet maker is configured with a book stacker
and a side-trimmer, the trim bin is located in the book
stacker.
3 The Stacker The stacker collects the finished books.
4 Communications cable The communications cable connects the side-trimmer to
the booklet maker.
5 Voltage label The voltage label displays the selected voltage.
6 Power input connector The power input connector is used to connect the Book-
let maker to the electrical power supply.
7 Power ON/OFF switch The mains power ON/OFF switch turns the Book Stacker
ON or OFF.
8 Fuses The fuses make sure the operator and the machine are
protected if there is an electrical problem or short circuit.
9 Rating and serial label The rating label displays the type of machine, serial
number, power use, and fuse information.
Description of the side-trimmer
12 Chapter 2 - Introduction to the P2T 2-Knife Trimmer