Oce P2T, Operation Manual

Page: 54 / 62

1. Outfeed guard, lifted.
2. Outfeed lower guide.
Procedure
1. Use the mains ON/OFF switch to turn OFF the side trimmer.
2. Use your hand to lift the outfeed guard. See figure 18.
3. For ink-based printers only:
Apply a small quantity of polish onto a cloth and clean the outfeed lower guide. See figure 19.
4. For ink-based and toner-based printers:
Apply a small quantity of polish onto a cloth and clean the outfeed lower guide. See figure 19.
NOTE
Do not polish onto any of the belts.
5. Lower the outfeed guard.
6. Use the mains ON/OFF switch to turn ON the side trimmer.
Clean the book supports
When to do
• When there are repeated book jams in the booklet-making system.
Materials needed
• Cleaning cloth
• Household spray polish that contains silicone
• For ink-based printers only: cleaning fluid that is supplied to clean the printer
Procedure
1. Remove the book supports. See Remove and re-fit the book supports of the side-trimmer on
page 34 .
2. For ink-based printers only:
Apply the prescribed cleaning liquid onto a cloth and clean the book supports.
3. For ink-based and toner-based printers:
Apply a small quantity of polish onto a cloth and clean the book supports.
NOTE
Do not polish onto any of the belts.
4. Fit the book supports. See
Remove and re-fit the book supports of the side-trimmer on
page 34 .
Operator maintenance
54 Chapter 7 - Maintenance