Oce im5530 User Functions Manual Download Page 76

Page: 76 / 192

3.SETTING ITEMS (USER)

2.SETTING COPY FUNCTIONS (Cont.)

Specify the following items as you require.

• In the “INSERTER/INVERT BACKSIDE COVER” option, press the [ON] button if you want to invert the back

cover that is fed from the Inserter Unit. This option is useful when you want to output the front cover as the
face side will be front side, and output the back cover sheet as the face side will be the back side.

• In the TAB EXTENSION option, you can set the tab extension of the tab paper that are set in the drawers or

bypass feed.

Press the [ENTER] button.

• The default settings for each mode are changed as you specified.

Summary of Contents for im5530

































































































































































































Search results

Summary of Contents for im5530

Reviews:

Related manuals for im5530

Brands by name

Popular brands

Oce im5530, User Functions Manual

Search results

Summary of Contents for im5530

Reviews:

Related manuals for im5530

Brands by name

Popular brands