Oce im5530 User Functions Manual Download Page 28

Page: 28 / 192

1.MANAGING ADDRESS BOOK (ADDRESS MENU)

2.MANAGING GROUPS (Cont.)

Editing Groups

The following procedure describes how to edit the name of groups, add or remove the members in groups.

Editing Group Name

Press the [USER FUNCTIONS] button on the control panel to enter the
User Functions menu.

Press the [ADDRESS] button, and then press the [GROUP] button on
the touch panel.

• The GROUP screen is displayed.

Press the group that you want to edit and press the [EDIT] button.

• The GROUP NO. EDIT screen is displayed.

If the touch panel does not display the group that you want to edit, press the [Next] button to display the next
screen.

Summary of Contents for im5530

































































































































































































Search results

Summary of Contents for im5530

Reviews:

Related manuals for im5530

Brands by name

Popular brands

Oce im5530, User Functions Manual

Search results

Summary of Contents for im5530

Reviews:

Related manuals for im5530

Brands by name

Popular brands