Oce im3512 Operation Manual Download Page 171

Page: 171 / 196

CALLING UP AND USING A FILE

7-19

Touch the [OK] key.

Touch the [PRINT AND DELETE THE
DATA] key or the [PRINT AND SAVE THE
DATA] key.

If the [PRI

T A

DELETE THE DATA] key
is touched, the files will
be automatically deleted
after printing.
If the [PRI

T A

D SAVE

THE DATA] key is

touched, the files will be saved after printing.
If there are no files that match the search
conditions, you will return to the file list screen.

CANCEL

PRINT AND DELETE THE DATA

PRINT AND SAVE THE DATA

NOTES

●

If "Auditing mode" is enabled in the administrator settings for copy mode, print mode, or document filing mode,
it will not be possible to perform batch printing of [ALL FILES].

●

To display the job tab of a mode for which "Auditing mode" is enabled in the administrator settings, the account
number must be entered.

Copy_SEC.book 19 ページ２００７年９月１２日　水曜日　午後１時３３分

Summary of Contents for im3512





































































































































































































Search results

Summary of Contents for im3512

Reviews:

Related manuals for im3512

Brands by name

Popular brands

Oce im3512, Operation Manual

Search results

Summary of Contents for im3512

Reviews:

Related manuals for im3512

Brands by name

Popular brands