Oce im3512 Operation Manual Download

Page: 127 / 196

SPECIAL MODES

5-23

Transparency film with insert sheets

When copying onto transparency film, blank insert sheets can be placed between transparent sheets.

●

This function only operates in "one-sided to one-
sided" and "two-sided to one-sided" modes.

●

Multiple copies cannot be selected in this mode.

●

The inserts are inserted under each transparency
as shown at left.

●

Select insert paper that is the same size as the
transparencies.

●

Transparencies can be fed from the tray 2 or
bypass tray.

●

If the transparencies are loaded in tray 2, be sure
to set the paper size and paper type as explained
on pages 2-5 and 2-6.

Load transparency film into the tray 2.

Remove any paper
already in the tray 2
before loading the
transparency film. (To
load paper in the tray 2,
see pages 2-6 and 2-7.)

Press the [SYSTEM SETTINGS] key.

The system settings
menu screen will
appear.

Touch the [PAPER TRAY SETTINGS] key.

The paper tray selection
screen will appear.

Touch the [TRAY SETTINGS] key.

Touch the

key to display the tray

settings screen of tray 2.

Touch the [TYPE/SIZE] key.

Touch the [TRANSPARENCY] key.

Touch the [OK] key.

If the paper size was changed from an inch size to an
AB size, or from an AB size to an inch size, be sure
to set the paper type and size as explained on steps
5 to 6 on page 2-5 and steps 7 to 10 on page 2-6.

Insert sheets

Example: Inserting insert sheets between transparencies

Originals (1-sided)

Originals (2-sided)

Two-sided originals are only
supported when automatic
document feeder is used.

Inserts can also be
copied on.

JOB STATUS

SYSTEM

SETTI

PAPER TRAY

SETTINGS

ATA

ORWARD

RINT

PRINTER

CONDITION

SYSTEM SETTINGS

PAPER TRAY SETTINGS

TRAY SETTINGS

1/8

PLAIN / 8 x11

PAPER TRAY SETTINGS

TYPE / SIZE

SYSTEM SETTINGS

TRAY 1

FAX

I-FAX

COPY

DOC.

FILING

FIXED PAPER SIDE

DISABLE DUPLEX

DISABLE STAPLE

DISABLE PUNCH

TYPE / SIZE

TRAY 2

PER TRAY SETTINGS

COPY

I-FAX

DOC.

FILING

FAX

PLAIN / 8 x11

HEAVY PAPER

TYPE.

LETTER HEAD

LABELS

PRE-PUNCHED

COLOR

TRANSPARENCY

TYPE

SIZE

AUTO-INCH

AUTO-AB

SIZE INPUT

8 X11,8 X11R

A4,A4R,B5,B5R

JAPANESE P/C

X420 Y297

SETTING

NON STANDARD
SIZE

2/2

Copy_SEC.book 23 ページ２００７年９月１２日　水曜日　午後１時３３分

Summary of Contents for im3512





































































































































































































Search results

Summary of Contents for im3512

Reviews:

Related manuals for im3512

Brands by name

Popular brands

Oce im3512, Operation Manual

Search results

Summary of Contents for im3512

Reviews:

Related manuals for im3512

Brands by name

Popular brands