7
ENGLISH
Media installation and removal
1
Put the media on the table.
If you want to use a dolly, contact us. We have a
recommend product.
2
Insert the scroller shafts into the paper tube.
Scroller shaft
Roll spacer
Note
-
Adjust the position of the roller shaft so that the roll
spacer is positioned at the center of the media roll.
3
Install the scroller fl ange into each end of the
media roll.
(1) Insert the scroller fl ange into each edge of the paper
tube.
Scroller fl ange
Roll media installation procedure
The installation method of the scroller fl ange varies with the type, weight and take-up direction of the media. See the tables
below to install the scroller fl ange correctly.
General media
Vinyl chloride media
Flange spacer
Required
Not required
(2) Insert the fl ange spacer between the scroller fl ange
and the media roll.
Flange spacer
(3) Push the scroller fl ange until it stops and turn the handle
clockwise until the fl ange is fi xed to the paper tube.
Scroller fl ange
Handle
(4) Remove the fl ange spacers.
Summary of Contents for CS6407
