Oce CS6407, Quick Reference Manual

Page: 14 / 206

14
11
Remove the tension bar from the tension bar
hook.
12
Loosen the knob screw of each tension bar
hook and extend it laterally.
Knob screw
Tension bar hook
13
Recommended dolly
Media
Set a dolly under the media and lift the media
to remove it.
<Media at the supply side>
1
Set the printer to the offl ine state by pressing
the
O N L I N E
key.
Ç
I N K M E D I A R E G
È
Å
M E D I A M . A D V
Æ
2
Press the key.
The TUR’s take-up switch is activated by selecting
media.
3
Lift the slackened part and remove the tension
bar at the supply side.
Peel roller
Scroller
<Media in general>
Tension bar
<Vinyl chloride media>
Printer rear (supply side)
Peel roller
Tension bar
S size tension bar
n b n n a
Switch
Caution
- Do not ratate the peel roller, or the printer may be
damaged.
4
Rotate the pressure control knob clockwise to
raise the pressure roller.
Takeup side Supply side
or
Pressure control knobs
5
Rotate the scroller fl ange manually to take up
the media.
6
Remove the scroller fl ange of the printer.
Printer rear (supply side)
Scroller fl ange
Printer rear
e