Oce CS6407, Quick Reference Manual

Page: 20 / 206

20
Adjusting tension bar length
A set of tension bars for the supply side includes the
following parts. Use suitable ones depending on the width
and type of the media.
„
Coupling tension bars (supply side)
Tension bars can be connected to each other by screwing. The
bar's length is 72 inches when an L-size bar is connected to an
M-size bar. The L-size tension bar whose both ends are convex
is always used. M-size and S-size tension bars whose one end
is concave are coupled with the L-size tension bar.
- In case of vinyl chloride media, use only one S size
tension bar (16 inches) (about 41cm).
Print head cleaning
The following two types of print head cleaning are provided. Use the suitable one.
Type of cleaning Usage
NORMAL ALL Recovery from nozzle-out
STRONG ALL Recovery from nozzle-out that is not rectifi ed by [NORMAL ALL]
1
Set the printer to the offl ine state.
(Press the
O N L I N E
key.)
Ç
I N K M E D I A R E G
È
Å
M E D I A M . A D V
Æ
2
Press the
M E N U
key to display PH.REC
MENU.
Ç
I N K M E D I A R E G
È
Å
M E D I A M . A D V
Æ
M E N U
Ç
R E W I N D F O R M F E E D
È
Å
P H . R E C P H . M A I N
Æ
3
Press the key to enter the head cleaning
menu.
# P H R E C O V E R Y
> N O R M A L
Note
- If ink fi lling from the ink tray is not yet completed, the ink supply
menu is displayed instead of the cleaning menu.
- Prepare an ink pack and perform ink supply operation.
4
To change the parameter, press the key.
# P H R E C O V E R Y
> N O R M A L
5
Select the option for cleaning with the and
keys.
> S T R O N G
# P H R E C O V E R Y
> N O R M A L
6
Press the key.
# P H R E C O V E R Y
* B O T T L E O K ?
7
Select head numbers with the key or the
key, and reverse (display or non-display) the
selected head numbers with the key or the
key.
# S E L E C T : 8 7 6 5 4 3 2 1 F B
* B O T T L E O K ?
Note
- The indicated head numbers denote the heads to be cleaned.
L size (48 inches) (123 cm): 1 piece
M size (24 inches) (61 cm): 1 piece
S size (16 inches) (41 cm): 2 pieces