Oce CS4300, User Manual

Page: 42 / 136

Automatic Shut Down after Idle Time
Introduction
On delivery, the scanner is set for automatic entry into sleep mode after a preset default
idle time, i.e. the length of time the scanner is not active.
You can prolong or shorten the idle time value to match your normal workflow.
To change/set the sleep mode options:
1.
Open Océ Scanner Agent. Double-left-click the scanner icon in the system tray.
2.
Select the Timer Tab.
3.
Select or deselect the Enter Sleep mode automatically option.
4.
If you do not select the Enter Sleep mode automatically option, you will need to use the
manual method for entering sleep mode by holding the power button down for 3 seconds.
5.
If you do select Enter Sleep mode automatically option, proceed to the next step to set
the Idle time value.
6.
Set the value Idle time before entering sleep. This is the number of minutes the scanner
can stand idle before entering the sleep mode on its own.
Chapter 4 - Turning Power ON/OFF - Wake/Sleep Mode 42
Automatic Shut Down after Idle Time