Océ CS230, User Manual

Page: 268 / 468

4 Specifying settings from the control panel
4-138 CS230 (Phase3)
PING TX address
The host address of the device to ping can be specified.
1
In the PING Confirmation screen, touch [Host Address].
The Host Address screen appears.
2
Touch [IP Address Input] or [Host Name Input].
– To specify the host address with the IP address, touch [IP Address
Input].
– To specify the host address with the host name, touch [Host Name
Input].
– If selecting [Host Name Input], check that the DNS settings are
specified correctly before making the selection. For details, refer to
"TCP/IP settings" on page 4-59.
3
Enter the host address (IP address or host name (up to 255
characters)).
– To edit the values that you entered with "IP Address Input", touch
[
] or [ ] to move the cursor to the desired area, touch [Delete],
and enter the new value.
– To clear all values, press the [C] (clear) key.
– If the host address exceeds 81 characters, touch [Details] to display
the Host Address Detail screen with the rest of the host addresses.
4
Touch [OK].
The PING TX address is set.