Océ CS230, User Manual

Page: 235 / 468

Specifying settings from the control panel 4
CS230 (Phase3) 4-105
4.19 Search default setting
You can specify the LDAP server that is to perform searches by priority from
the registered LDAP servers.
To specify the detect default server settings
1
In the Administrator Setting screen, touch [5 Network Setting].
2
In the Network Setting screen, touch [7 LDAP Setting].
3
In the LDAP Setting screen, touch [3 Search Default Setting].
The Detect Default Setting screen appears.
4
Select the LDAP server that is to perform searches by priority.
5
Touch [OK].
2
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.