11 | EN
Mounting instructions, PYROLINE
®
Con PLC fire protection duct
Product description, PYROLINE® Con PLC fire protection duct
No.
Product element
Function
1
Duct trough made up of
duct walls
A
and duct base
B
Cable seat,
support on support system
With connector
C
Connection of the joints of two fire
protection duct troughs
2
Duct cover with side and
joint overlap
D
(Straight) connection of the fire protec-
tion duct
3
Sealing strip
Sealing of joints and duct cover
4
90° bend
Creation of corner connections
5
T piece
Creation of cable branches
6
Spacer
Stiffening of suspended support
7
Support rail
Support for fire protection duct, mount-
ing with threaded rods
8
Wall bracket and support
bracket
Mounting on wall or on suspended
support, support for fire protection duct
9
Support
Mounting on ceiling, support of the
bracket
10
Protective cap for support
Edge protection
11
Threaded rod
Suspension for support rail
12
End piece
End closure of the fire protection duct
13
Wall connection collar
Doubling for wall penetration
14
Counter-sunk head screw
Fastening of doubler
Optional fastening of duct covers
15
MMS bolt tie for masonry
Fastening of wall brackets
16
Bolt tie for concrete
Fastening of wall brackets, suspended
supports or threaded rods
17
Separating retainer with
Separation of cables of different volta-
ges or functions
separating retainer connec-
tor
Connection and stabilisation of the joints
of separating retainers
18
Doubler
Necessary for exits of individual cables
and cable bundles
19
KTM mortar
Sealing of connection joints and cracks
20
MIW-S mineral wool
Sealing of wall penetrations
21
Vertical bend, rising
Vertical direction changes
22
Vertical bend, falling
Vertical direction changes
Tab 2:
Product elements, PYROLINE
®
Con S PLC
Summary of Contents for EI30
Page 63: ...EN 63 Notes...
