Identifikationssystem OBID
®
Montageanleitung ID ZK.AB-A
FEIG ELECTRONIC GmbH
M00500.0de-ID-B.DOC
Seite 35 von 52
3.7 Programming of the ID ZK.AB-A with external antenna ID ZK.ANT-A
The programming of ID ZK.AB-A should always be done through the external antenna, as far as
this antenna is used. Should this be impossible due to an unfavourable location, the programming
may also be done with the help of the dummy antenna, which is located in the housing of ID
ZK.AB-A. However, you have to consider the fact that the range of this dummy antenna is very
much limited. For this reason, we recommend to determine the best receiving position of the
“Masterkarte“ before starting the programming process.
Put the transponder in the position indicated in the illustration 8. The transponder should be
located directly on the housing surface of ID ZK.AB-A.
Illustration 8 indicates the position of the dummy antenna. Other transponder types have to be
aligned accordingly.
Illustration 8: front view of the housing cover of ID ZK.AB-A
Position of the
internal dummy
antenna
Transponder Card
