Identifikationssystem OBID
®
Montageanleitung ID ZK.AB-A
FEIG ELECTRONIC GmbH
M00500.0de-ID-B.DOC
Seite 30 von 52
3.2 Installation with surface frame ID APR-A
1. Wall fastening:
l
Please mount on an even surface.
l
Make an opening for the cable in the lower part of the housing, insert the twisted nipple and
pull the cable through.
l
Fasten the lower part of the housing to the wall.
2. Connection:
see chapter 3.3 – 3.5
3. How to close the housing:
l
Lock the connecting board (1) into the lower part of the housing, with the connecting terminal
pointing downwards, as shown in illustr. 3. Press the snap-in hooks apart with your fingers.
l
Put the upper part of the housing onto the lower part. Make sure that the contact terminal strip
is inserted exactly into socket terminal strip X3!
l
Fasten the upper part and the lower part of the housing with the help of a 3,2 x 25 mm tap
screw.
4. Initiation:
see chapter 3.8, performance check
5. How to attach the clear-vision screen and the front sticker:
Insert the clear-vision screen and put the front label on the clean and degreased housing.
X 3
Illustration 3: Surface mounting
Open surface frame with inserted connecting board (1)
