Identifikationssystem OBID
®
Montageanleitung ID ZK.AB-A
FEIG ELECTRONIC GmbH
M00500.0de-ID-B.DOC
Seite 29 von 52
3.1 Installation upon flush socket
1. Choose place of installation:
Installation should be carried out on an even surface.
2. Connection:
see chapter 3.3 –3.5
3. Initiation:
l
Let the connecting board lock into the lower part of the housing (see: illustr. 2, rear view with
locked connecting board (1).
l
Put the upper part of the housing on the lower part. Make sure that you insert the contact
terminal strip exactly into socket terminal strip X3 !
l
See also: chapter 3.8: performance check
5. Wall fastening:
Please check initiation works prior to wall fastening.
l
Remove the upper part of the housing from the lower part.
l
Fasten the lower part of the housing to the wall with the connecting board being locked.
l
Put the upper part of the housing on the lower part. Make sure that the contact terminal strip of
the reader electronics is inserted exactly into socket terminal strip X3!
l
Fasten the upper part of the housing on the lower part with the help of the 3,2 x 25 mm tap
screw.
l
Insert the transparent clear-vision screen and put the front label on the clean and degreased
housing.
(1)
X3
IN1 GND GN RO
EA2 EA1 ASW NO COM NC -/~ +/~
Illustration 2: rear view with locked connecting board (1)
