Q-Code User Manual
Ver. 7.0 2021/11/30
73
Note:
1. Only NX1 supports the record section.
2. Recording and playing audio (voice or melody) are exclusive.
3. When Q-Code is erasing record block on SPI Flash, program on XIP will be paused about
30 ~ 100ms (Realtime erasing is enabled) or 100 ~ 200ms (Realtime erasing is disabled).
Pause time may vary according to SPI Flash.
4. When record block is erasing, SPI Flash operations do not work.
5. When playing content on SPI Flash (voice / melody / action …), erasing record block will
cause playing not work correctly.
6. The recoding function needs wo work with SPI_Encoder 1.53 or above version.
7. Keyboard recording function is not available if Realtime Erasing is enabled.
Record blocks are defined in
[Record]
. Recording / Erasing operation works on record block. The size
of record section if determined by Recording Algorithm and specified Length.
Ex.
[Record]
Rec0 = [Length: 10s]
3.9.8 LED Sting Section
The LED string data is stored in SPI Flash, it’s generated by
, and its file format is .csv which is
arranged in order of 8-bit red, 8-bit green, and 8-bit blue.
Note:
1. NY4 / NY5 / NY5+ / NY6 / NY7 / NY9T do not suupport the LED String section.
2. The LED String section must work with SPI_Encoder 1.90 or above version.
Add Record block
Adjust record length
Occupied Size on SPI Flash