NyQuest Innovation Labs Q-Code, User Manual

Page: 304 / 346

Q-Code User Manual
Ver. 7.0 2021/11/30 304
5.4.6.7 Table Command
Table Command
TableL(TableName, Rx/Xx, Ry/Xy, Ri) TableM(TableName, Rx/Xx, Ry/Xy, Ri)
TableH(TableName, Rx/Xx, Ry/Xy, Ri) Table(TableName, Rx/Xx, Ry/Xy, Rh, Rm, Rl)
TableL(TableName, X, Y, Ri) TableM(TableName, X, Y, Ri)
TableH(TableName, X, Y, Ri) Table(TableName, X, Y, Rh, Rm, Rl)
TableL(TableName, Rx/Xx, Ry/Xy, Xi) TableH(TableName, Rx/Xx, Ry/Xy, Xi)
Table(TableName, Rx/Xx, Ry/Xy, Xh, Xl) TableL(TableName, X, Y, Xi)
TableH(TableName, X, Y, Xi) Table(TableName, X, Y, Xh, Xl)
5.4.6.8 Serial Control TX Command
Serial Control TX Command
SC_TX(Mode, data) SC_TX(Mode, Ri:Rj:Rl:Rk) SC_TX(Mode, Xi:Xj)
5.4.6.9 PWMIO Command
PWMIO Command
PWMOut PWMOutS PlayPWM PlayPMWS WaitPN
StopPWM PausePWM ResumePWM HoldPWM PWMCtrl
5.4.6.10 Delay Command
Delay Command
Delay(time) Delay(Ri:Rj:Rk) WaitDN(n) StopD(n) PauseD(n)
ResumeD(n) SDelay(time) - - -
5.4.6.11 Action Command
Action Command
PlayA PlayAS WaitAN(Ch) PauseA(Ch) ResumeA(Ch)
HoldA(Ch) StopA(Ch) - - -
5.4.6.12 MISC Command
MISC Command
Input State Action Mark State Key_CLR Key_ON Key_OFF
Stop Pause(n) Resume(n) WDT_CLR Repeat
END ReadRadj(Ri) SW_Reset Debounce(Time) -