Q-Code User Manual
Ver. 7.0 2021/11/30
268
enter sleep mode.
TR3: ResumeUp
; Resume the playbacks of data.
4.31.16 Audio_ON
This command is for activating Audio output function.
Note:
1. NY4 / NY9T / NX1 do not support this command.
2. The default output setting is Audio_ON that is activated as PowerOn.
3. If user uses DAC / Push-Pull output then turns on Audio output, it might give out “pop”
sound.
4.31.17 Audio_OFF
This command is for closing Audio output function.
Note:
1. NY4 / NY9T / NX1 do not support this command.
2. For voice output again, please use Audio_ON.
3. If user uses DAC / Push-Pull output then turns off Audio output, it might give out “pop”
sound.
4. Using PWM / DAC output, calling Audio_OFF will makes PWM / DAC output pin to be in
floating status.
Ex.
[Path]
TR1: PlayV(Ch0,$V0)
; Play Voice.
TR2: Audio_ON
;
Activate audio output.
TR3: Audio_OFF
;
Deactivate audio output.
4.31.18 AudioMode=n
Select the audio output mode.
n:
audio output mode. DAC / PWM / PP.
NY5+ supports DAC / PWM.
NY6A only supports PWM.
NY6B / NY6C provide DAC / PWM.
NY7A series provide DAC / PWM.
NY7B / NY7C series provide DAC / Push-Pull.
Note: NY4 / NY5 / NY9T / NX1 do not support this command.
