NyQuest Innovation Labs Q-Code User Manual Download Page 25

Page: 25 / 346

Q-Code User Manual

Ver. 7.0 2021/11/30

Move the mouse over ICE Status Icon will show the status of ICE.

Show “Emulator has disconnected” upon disconnecting ICE device.

Show “Emulator Is running” while emulator is running.

Show “Emulator is sleeping” while emulator enters sleeping mode.

2.7.2 ICE Connect Status

Show “ICE has connected” as the following figure.

Show “ICE has disconnected” as the following figure.

2.7.3 Row, Column, Characters

Show the information of cursor location including Row, Column and Character Count.

2.7.4 Insert Mode

Here shows whether the Text Edit Area is in Insert Mode or not.

Summary of Contents for Q-Code



























































































































































































































































































































































Search results

Summary of Contents for Q-Code

Reviews:

Related manuals for Q-Code

Brands by name

Popular brands

NyQuest Innovation Labs Q-Code, User Manual

Search results

Summary of Contents for Q-Code

Reviews:

Related manuals for Q-Code

Brands by name

Popular brands