53
Weather Screen Functions
Setup the Weather Function
1.
To setup the weather function you must fi rst enter the
postcode of the device location.
2.
Enter your postcode and press search
4.
To select local weather stations press the nearest purple
pins to your location. Pressing a purple pin will bring up
a notifi cation balloon that details the suburb of the pin
and the ability to add that location as a weather station
by pressing the ‘+’ symbol. Upon activation the pin will
change from purple to green.
3.
Once your postcode has been selected you will need
to locate up to three local weather stations. This
allows WaterMe to retrieve local weather forecasts on
a daily basis to prevent under or over watering your
garden.
6.
Ensure that Weather Rules Status is turned on.
7.
To adjust the ‘Rainfall Forecast Rules’ and ‘Temperature
Forecast Rules’ to modify watering during specifi ed
weather events.
8.
WaterMe is able to automatically adjust temperature
and rainfall variations that may occur. You are able to
confi gure how much to vary the watering schedule
based on these variations. A ‘Weather Schedule’ has
been included to alter the watering cycles based on
temperature.
9.
Rainfall Rules. i.e. if a zone in schedule 1 was due to
water for 10mins, WaterMe will readjust watering time
to 2mins
•
i.e. if a zone in schedule 1 was due to water for 10mins,
WaterMe will readjust watering time to 2mins.
1
2
3
4
5.
To remove an allocated weather station simply press
the green pin. This will bring up a notifi cation balloon,
press the rubbish bin to remove the selected weather
station.
6
9