18
It is recommended that the WaterMe is installed with the bottom wire conduit facing the ground. WaterMe is uniquely designed
to off er two installation types that provides access for both front and rear wire extrusion.
Option 1: Standard Installation
The WaterMe Wireless Irrigation Controller has a wire conduit
at the bottom of the device for valve wire extrusion. The
controller has provisions for PVC pipe installation to provide
protection from the wire conduit (optimal 32mm PVC pipe -
not included).
Wire Output
(PVC Pipe Installation - optional)
Wall
Installation Types
Option 2: Smart Installation
Wall
Wire Extrusion
Rear Conduit
The WaterMe Wireless Irrigation Controller is intelligently
designed to be capable of wire output at the rear of the
controller. This type of installation allows for the option of
hidden wires and power output at the rear of the controller.
An extrusion point will need to be made in the supporting
wall for the valve wires to pass through. This extrusion
point needs to be made prior to installation of WaterMe
i
Information
•
Smart installation requires a wire entry to be
made in the wall of the mounting location
SECTION 3.1