11
6.
To put WaterMe into pairing mode press and hold
the smart confi guration button until 2 beeps sound
(approximately 3 seconds ). The WaterMe main status
light will begin to fl ash in green and red intervals. This
indicates that WaterMe is now in pairing mode.
•
Once WaterMe is in pairing mode, go back to the
WaterMe app on your mobile device.
7.
Press ‘Start’ on the smart confi guration screen
containing information relating to your home Wi-Fi
network. The pairing function will share your network
information with the WaterMe controller.
•
After approximately 30 seconds, the WaterMe unit will
restart.
8.
If successful, the main status light on your WaterMe unit
will remain solid green. If the indicator light does not
remain solid green, then refer to the access point mode
confi guration.
!
Note
•
Initially the main status light will fl ash red until
it establishes a connection. When a connection
has been established the main status light will
remain solid green.
5.
Once the information has been entered ensure
that your WaterMe Wireless Irrigation Controller is
connected to a power source and you have the top
cover removed. Once connected, the main status light
will fl ash red indicating a network connection needs
to be established. After approximately 30 seconds, the
unit will beep once, indicating that WaterMe has been
initialised and is ready to be used.
1
2
Description
1. Smart confi guration button
2. Main status indicator light