Nxg NX-RM505 Operating Manual Download

Page: 52 / 80

18. Warranty

The NX-RM505 is covered against any manufacturer’s defects or
defects of workmanship for a period of one year from the date
of purchase. The warranty does not cover the following:

• Batteries or damage to the remote from faulty batteries.

• Damage from misuse, neglect, or acts of nature.

• Products that have been modified or incorporated into other

products.

• Products purchased more than 12 months from the current date.

• Units purchased in ‘AS IS’ condition or units purchased as

‘Distressed Merchandise.’

19. Specifications

- Range: 40 to 60 feet, depending upon components

- Weight: 8 oz. (with batteries)

- Size: 9. 0 x 3. 0 x 1. 3

- Batteries: Four AAA Alkaline batteries

- LCD Size: 1. 4 x 2. 1

NX-RM505

NX-RM505_Remote_Manual 10/6/08 6:17 PM Page 52

Summary of Contents for NX-RM505

















































































Search results

Summary of Contents for NX-RM505

Reviews:

Related manuals for NX-RM505

Brands by name

Popular brands

Nxg NX-RM505, Operating Manual

Search results

Summary of Contents for NX-RM505

Reviews:

Related manuals for NX-RM505

Brands by name

Popular brands