Nxg NX-RM505 Operating Manual Download

Page: 35 / 80

Press a single button if you wish to erase individual buttons one at a
time. This will show all the functions in the device. Press the button
you wish to erase.

Repeat from Step #5 to erase any other devices or learned buttons
you require.

Press the

MAIN

button to exit to main Erase mode. Press the

MAIN

button once again to exit the SETUP mode.

B. Erasing Favorite Channel Buttons

Go to the SETUP mode by pressing both the

MAIN

and

ENTER

buttons simultaneously for three seconds.

Press the

ERASE

button next to the LCD screen.

Press the

FAV

button.

If you wish to erase all the favorite channel buttons in the
NX-RM505, press the

ALL

button and then press the

SURE

? button

at the next LCD screen.

If you wish to erase one button, press the

KEY

button. Press the

individual button you want to erase and continue with any other
individual buttons you want to erase.

Repeat from Step #5 to erase any favorite Channel buttons you
require.

NX-RM505

NX-RM505_Remote_Manual 10/6/08 6:17 PM Page 35

Summary of Contents for NX-RM505

















































































Search results

Summary of Contents for NX-RM505

Reviews:

Related manuals for NX-RM505

Brands by name

Popular brands

Nxg NX-RM505, Operating Manual

Search results

Summary of Contents for NX-RM505

Reviews:

Related manuals for NX-RM505

Brands by name

Popular brands