8. Erasing Existing Programming
A. Erasing Learned Buttons
1
Go to the SETUP mode by pressing both the
MAIN
and
ENTER
buttons simultaneously for three seconds.
2
Press the
ERASE
button next to the LCD screen.
3
Press the
LEARN
button.
4
If you wish to erase all the learned functions in the NX-RM505 ,
press the
ALL
button and then press the
SURE?
button at the next
LCD screen.
5
If you wish to erase all the buttons in a single device or an individual
button in the device, press the
Device
button.
6
Press the device button (TV, VCR, Audio, etc.) to erase the button(s)
from the device.
Tip:
Press the
PAGE
button and then press the
DEVICE
button
(TV, VCR, Audio, etc.) to erase the learned function in the
device button itself. Programming this learned function to the
Device button was explained in ‘Programming the Ten Device
Buttons’ earlier.
7
Press the
ALL
button if you wish to erase all the learned buttons in
the device and press the
SURE?
button at the next LCD screen.
NX-RM505
34
NX-RM505_Remote_Manual 10/6/08 6:17 PM Page 34
Summary of Contents for NX-RM505
