63
3.7 Programming the Setup Functions
3.7.8 Password ([MENU] Button
_
Setup
_
Password)
This function is used to setup the Password for the PTZ dome camera. You may use this
feature to prevent unauthorized users from making unwanted changes to the camera
settings and function programming. This feature also be used to change and edit your
Password, if you feel it has been compromised.
1. Press the [Menu] button on the Controller Keyboard. Select the ‘Setup’ option. Scroll
down to ‘Password,’ then move the Joystick handle to the right to access the sub-
menu.
2. Scroll down to ‘Enable Password’ and change this setting to ‘ON.’ The factory default
password is 9999.
3. Once enabled, highlight ‘Edit Password’ and move the Joystick to the right once to
change the default password.
4. A number ‘0’ appears and is simultaneously highlighted. Either keep the number ‘0’
or move the Joystick up or down to change the number. Moving one digit at a time,
input the desired 4-digit password.
5. Once complete, a new line appears and prompts you to confirm the password just
entered. If the 4-digit password is a match, the camera will promptly inform you that
the password has been successfully changed.
6. Finish the programming by scrolling down to the bottom to ‘Save And Exit.’
Note:
You must ‘Save And Exit’ to finalize the programming, pressing [ESC] button while
programming will exit programming without saving.
Enable Password
Edit Password
Save And Exit
Password Setup
OFF
:
