50
3.5.1 Factory Default ([MENU] Button
_
Data
_
Factory Default)
The Factory Default function is used to reset the ENTIRE camera settings to the factory
default settings.
This will erase all ‘Camera’ and ‘Function’ programming! Every-
thing will be erased!
1. Upon entering the sub-menu, you will be prompted to reset the camera to the
factory default settings. Select ‘OK’ to delete all programming and revert to fac-
tory default, or ‘CANCEL’ to cancel and return to the ‘Data Menu.’ “WAITING FOR
COMPLETION” will flash momentarily and the progress bar will display the current
status if activated.
3.5.2 Erase Data ([MENU] Button
_
Data
_
Erase Data)
This will erase all ‘Function’ (Preset, Pattern, Scan, Tour) programming, but leave
the ‘Camera’ (Focus, WB, AE, BLC, etc) programming intact.
1. Upon entering the sub-menu, you will be prompted to erase the programmed data.
Select ‘OK’ to erase, or ‘CANCEL’ to cancel and return to the ‘Data Menu.’
3.5 Programming the Data Functions
ARE YOU SURE ?
CANCEL
OK
Factory Default
ARE YOU SURE ?
CANCEL
OK
Erase Programmed Data
