Nuvico Easy Trak SC-S36 Installation Manual Download Page 41

Page: 41 / 68

3.3.6 OSD Display ([MENU] Button

Screen

OSD Display)

Access the ‘OSD Display’ section of the OSD main menu to enable or disable the various
titles and functions covered in the previous programming sections.

1. Press the [Menu] button on the Controller Keyboard. Select the ‘Screen’ option. Scroll

down to ‘OSD Display,’ then press the Joystick handle to the right to access the sub-
menu.

2. Enable or disable the various Title options and functions.
3. Once the desired changes have been made, scroll down to the bottom to ‘Save And

Exit.’

Note:

You must ‘Save And Exit’ to finalize the programming. Pressing [ESC] button while

programming will only exit the programming without saving.

3.3 Programming the Screen Functions

Function Title:

Enables or disables the Preset, Pattern,

Scan, and Tour Title functions.

Camera Title:

Enable or disable the Camera Title.

Dome ID:

Enable or disable the Dome ID display.

Zone Title:

Enable or disable the Zone Titles.

North Direction:

Enable or disable the azimuth

direction display.

Position:

Enable or disable the current viewing

coordinates.

Zoom Magnification:

Enable or disable the current

zoom magnification level.

Fan Detection:

Enable or disable the fan icon display.

Date/Time:

Enable or disable the Date/Time display.

Function Title

Camera Title

Dome ID

Zone Title

North Direction

Position

Zoom Magnification

Fan Detection

Date/Time

Save And Exit

OSD DISPLAY

OFF

Summary of Contents for Easy Trak SC-S36





































































Search results

Summary of Contents for Easy Trak SC-S36

Reviews:

Related manuals for Easy Trak SC-S36

Brands by name

Popular brands

Nuvico Easy Trak SC-S36, Installation Manual

Search results

Summary of Contents for Easy Trak SC-S36

Reviews:

Related manuals for Easy Trak SC-S36

Brands by name

Popular brands