26
Select “Working” submenu on the settings
page by increase (F1) and decrease (F2) keys
and push enter (F4) key. On the next page,
select Preheating by using increase (F1) and
decrease (F2) keys and push enter (F4) key.
Select ON and push enter (F4) key.
7.3.2.
STANDBY
Standby is for energy saving while the
sterilizer is not in use. Select “Working”
submenu on the settings page by increase
(F1) and decrease (F2) keys and push enter
(F4) key. On the next page, select Standby by
using increase (F1) and decrease (F2) keys
and push enter (F4) key. Adjust the time (in
minutes) when to activate standby by using
increase (F1) and decrease (F2) keys and
push enter (F4) key.
7.3.3.
PRINTER
Sterilization parameters can be printed as alphanumeric via Thermal Printer that is optional
accessories. Printer should be selected as “ON” from printer settings page to take printout via
Thermal Printer.
7.3.4.
BUZZER
“Alarm Repeat Time” submenu is selected on
the working page by using the value increase
(F1) and decrease (F2) keys. If the alarm
condition continues after muting the alarm
buzzer, “Alarm Repeat Time” reactivates
audible alarm at the end of the desired time
(in minutes). If you want to exit this page
without any change, push the backspace key
(F3).
7.3.5.
SETUP
Select “Setup” by using increase (F1) and decrease (F2) buttons and push enter (F4) button to
access the page where the company name, address and phone number can be entered. This
information is to be used in print outs and memory. Each character of data is entered one by
one. Enter first character by using increase (F1) and decrease keys (F2) and push tab key (F3) to
