25
7.2.1.
EXTERNAL MEMORY (USB STICK)
USB Stick is connected to USB port-1 of the communication unit (Figure 2). “
” appears on
the working screen when the USB stick is identified by the microprocessor system.
If
does not appear on the screen, USB stick may be defective or may not be
connected correctly.
When “USB Record” submenu is selected on the memory page, there are four options: “Recent
Cycles”;”Older Cycles”; ”Error Record”; and “All”. Use increase (F1) and decrease (F2) keys to
select one of the options and push enter (F4) key to transfer to USB stick.
7.3.
SETTINGS
“Settings” menu is selected from the main
menu by using left (F1) and right (F2) keys.
Push enter (F4) key to access settings page on
the left. Use increase (F1) and decrease (F2)
keys to select a submenu.
“Working” menu is selected from the main
menu by using left (F1) and right (F2) keys.
Push enter (F4) key to access settings page on
the left. Use increase (F1) and decrease (F2)
buttons to select “Preheating”, “Waiting”,
“Printer” and “Buzzer” submenus.
7.3.1.
PREHEATING
Steam is produced by heating water in steam sterilizers. The steam penetrates to materials and
heats materials to be sterilized. This may lead to steam condensing on the instruments and
containers. Condensation forms on the objects being sterilized, and some of the condensation
drops to the bottom of the sterilization container. After sterilization, during the drying phase, all
the condensation is eliminated from the sterilization container and from the sterilized items
themselves. Activate ‘preheating’ section for better drying result.
