10
5.2.
HANDLING AND TRANSPORTATION
All handling and transportation must be carried out by using proper equipment and experienced
staff. The instrument must be supported underneath and never be turned upside down.
5.3.
UNPACKING
Remove the cardboard box packing and the second nylon wrapping around the instrument.
Ensure that no damage has occurred during transportation. The below mentioned are provided
with the instrument, please check them;
1 ea. user’s manual and warranty
1 ea. microbiological filter
3 pieces of shelves
1 piece shelf carrier
1 piece of shelf support
1 ea. PC Communication software CD
1 ea. PC communication cable
5.4.
MAINS SUPPLY
The instrument requires 230 V, 50/60 Hz.
Please make sure that the supplied mains matches the required power ratings which are written
on the name of plate of the instrument located at the back of the instrument.
Always plug-in the instrument to correctly grounded sockets.
A supply fitted with a circuit breaker should be used for protection against indirect
contact in case of isolation fault.
5.5.
POSITIONING
Check that the positioning is suitable for the usage purpose and users.
Check that the instrument is stable on its four pedestals.
The bench where the instrument is positioned should be resistant to the weight of the
instrument and vibration free.
Check that the user will be able to follow up the operation even when he deals with
something else.
Check that the positioning of the device prevents interference with other equipment in the
near surrounding.
Leave at least 20 cm free space between the device and wall.
