Nussbaum COMBI LIFT 4.80 H, Operating Manual And Inspection Book

Page: 5 / 63

Operating Manual and Inspection Book
COMBI LIFT 4.80 H / HYMAX II 8000
5 Version 3.0
Organisational Requirements
- The instructions for use are to be kept at the place of operation being easily accessible
at any time.
- In addition to the instructions for use, rules pertaining to other regulations i.e. accident
prevention and environmental rules are to be observed and adhered to.
- The owner of the Nußbaum lifting system must ensure that operators and persons
working with or around the lift occasionally conduct “refresher” courses to ensure that
the appropriate operating procedures and safety precautions are known.
- Personal Protective Equipment (PPE) must be used according to the appropriate regu-
lations.
- All safety- and danger signs on and around the lift are to be observed and followed!
- Spare parts must comply with the technical requirements specified by the manufactur-
er. This is only warranted with original parts.
-
Observe and adhere to the specified time intervals between tests and inspections.
Maintenance works, repairing faults
-
Adjustments, maintenance, and inspections, are to be followed according to the time
intervals specified. Details regarding the exchange of parts and components as men-
tioned in the operating instructions are to be adhered to.
These works must only be carried out by expert personal.
- After maintenance- and repair works loose screws, nuts and bolts must always be firm-
ly tightened!
Guarantee and liability
-
Our “General conditions of selling and delivering” are in force.
There will be no guarantee or liability for incidents involving injuries or death or damage
to equipment if these incidents are the result of one or more of the following reasons.
- Inappropriate use of the lift
- Inappropriate installation, initiation, operation and maintenance of the lift.
- Use of the lift while one or several security devices do not work, do not work correctly or
are not installed correctly.
- Failure to follow the regulations of the operating instructions regarding transport, storage,
installation, initiation, operation and maintenance of the lift.
- Unauthorized changes to the structure of the lift without first asking the producer.
- Unauthorized changes of adjustments of important components of the lift (e.g. driving
elements, power rating, motor speed, etc)
- Wrong or incorrect maintenance practice.
- Catastrophes, acts of God or external reasons.