Nussbaum COMBI LIFT 4.80 H, Operating Manual And Inspection Book

Page: 48 / 63

Operating Manual and Inspection Book
COMBI LIFT 4.80 H / HYMAX II 8000
48 Version 3.0
• Lower the lift into the ratchet. (press the button „lowering“ and pull the lever down-
wards).
• Adjust the columns again with a water bubble.
• Fasten the dowels with a torque key.
• Fasten the ramps and the safety device at the end of the rail.
• Adjust the sliding guidance at the crossbeam (approx. 4-5 mm movement between
the sliding guidance and the column).
• Adjust regular height of the rails at all of the four columns by moving the nuts, which
fix the carrying ropes in the head plate. For demanded measuring accuracy of all
important vehicle manufacturer it is necessary to install the lift very exactly and to
line it up. For this to the following points should be paid attention.
• Lift the automotive lift to eye level and lower it down in the ratchet (refer to operating
instructions).
#