Nussbaum 2.60 HL SST, Operating Instruction And Documentation

Page: 4 / 58

Operating Instruction and Documentation
2.60 HL SST
- 4 -
Dangers when operating the lift:
Nußbaum-Lifts are designed and built according to technical standards and the approved
regulations for technical safety. The use of Nußbaum lifts for purposes other than those for which they
were designed, may result in injury or even death.
The lift must only be operated :
- For its appropriate use
-
In faultless condition concerning technical security.
Organisational Requirements
-
The instructions for use are to be kept at the place of operation being easily access able
at any time.
- In addition to the instructions for use, rules pertaining to other regulations i.e. accident
prevention and environmental rules are to be observed and adhered to.
- The owner of the Nußbaum lifting system must ensure that operators and persons working with
or around the lift occasionally conduct “refresher” courses to ensure that the appropriate
operating procedures and safety precautions are known.
-
Personal Protective Equipment (PPE) must be used according to the appropriate regulations.
- All safety- and danger signs on and around the lift are to be observed and followed!
- Spare parts must comply with the technical requirements specified by the manufacturer.
This is only warranted with original parts.
-
Observe and adhere to the specified time intervals between tests and inspections.
Maintenance works, repairing faults
-
Adjustments, maintenance, and inspections, are to be followed according to the time intervals
specified. Details regarding the exchange of parts and components as mentioned in the
operating instructions are to be adhered to.
These works must only be carried out by expert personal.
- After maintenance- and repair works loose screws, nuts and bolts must always be firmly
tightened!
Guarantee and liability
- Our “General conditions of selling and delivering” are in force.
There will be no guarantee or liability for incidents involving injuries or death or damage to
equipment if these incidents are the result of one or more of the following reasons.
- Inappropriate use of the lift
- Inappropriate installation, initiation, operation and maintenance of the lift.
- Use of the lift while one or several security devices do not work, do not work correctly or are not
installed correctly.
- Failure to follow the regulations of the operating instructions regarding transport, storage,
installation, initiation, operation and maintenance of the lift.
- Unauthorized changes to the structure of the lift without first asking the producer.
- Unauthorized changes of adjustments of important components of the lift (e.g. driving elements,
power rating, motor speed, etc)
- Wrong or incorrect maintenance practice.
- Catastrophes, acts of God or external reasons.