Nuga NM-5000P, User Manual

Page: 12 / 24

NM-­5000P
How to Assemble the Product Frame
Connect the ring for
angle adjustment
Connect the (shorter) ring for angle
adjustment to the sub angle frame as
shown in the picture.
Fix the remote
controller holder
Use an L-­wrench to fix the remote
controller holder as shown in the
picture.
Completed appearance
Place the main angle frame
Put the main angle frame on the
assembled product frame.
Fix the frame leg and leg support
with 2 pieces of Screw No. 13 as
shown in the picture.
Place the sub angle frame
Put the sub angle frame on the
assembled product frame.
Loosen screws placed on the sub
angle frame and then fix the main
angle frame, main base frame and
sub angle frame all together.
Fix the frame leg and leg support with 2 pieces
of Screw No. 13 as shown in the picture.
Connect the ring for angle
adjustment
Connect the (longer) ring for angle
adjustment to the main angle frame
as shown in the picture.
Appearance from the bottom
Appearance from the side
Screw No.13
buffer rubber
Appearance from the bottom