Nuga NM-5000P, User Manual

Page: 14 / 24

NM-­5000P
NM-­5000P
NM-­5000P
Test Operations after Installation
Power switch in the main assembly
Controller for main assembly Controller for external projector
ⴘ
ⴙ
Check out the power supply
for the product
Turn on the power switch.
Check out operations of
remote controller
ྙ
Press the power button on the
remote controller
ྚ Adjust temperature for the
internal projector (+ / – button)
ྛ Adjust temperature for the
external projector (+ / – button)
Refer to ‘How to Use the Remote
Controller’ for each mode (Page 28)
Check out operations of
sub heater
Turn the dialer to set the desired
temperature in the sub heater
attached to the side of the sub mat.
Use the product
Lay yourself down with your legs
toward the sub mat and press the Auto
button in the remote controller for the
automatic operations in the product.
You may use the product while laying
yourself down the other way around.
Caution
Ensure the power supply to be
turned off after use or during no
use.
Otherwise, it might cause failure.
On Off
PWR AUTO
AUTO MANU
TEMP
MANUAL
TEMP
PJT
LOW FREQ
PJT L/F
Min Max
CONT
ⴚ
How to Use the Remote Controller
How to Use the Product by Mode
How to Use the External Projector
How to Use the Low Frequency Pad
How to Use the Product
How to Set Temperature for the Sub Heater
28
28
33
34
36
38
How to Use the Product
HIGH
LOW