Nuga NM-5000P, User Manual

Page: 8 / 24

Names and Functions of Product Components
NM-­5000P
Names and Functions of Product Components
The sub heater positioned on top of the sub mat increases the heating effects by combining the
tourmanium mat.
ⴙ Sub heater
Temperature can be set by turning a dial to the desired position. ⴛ Temperature setter for sub heater
A remote controller, external projector and low frequency pad are connected to the main assembly. ⴜ Connector bay
Low frequency pad has various functions including the relief from pain, etc. ⴚ
Low frequency pad
Both the main mat and sub mat are horizontally built, which can be used more conveniently with the
DWWDFKPHQWRIDKDQGOHWREHFRQWUROOHGLQVWHSUHVSHFWLYHO\IRUWKHGHVLUHGDQJOHRIÛÛRUÛ
Ceramics are separately built in around the cervical vertebrae as the acupressure load can be
equally distributed due to the design that the internal projector can be rotated in a certain angle to the
up/down/left/right.
In addition, there are few noises thanks to the minimized friction between the internal projector and
rail due to the specially designed guard rail which can be used semi-­permanently by minimizing the driving load.
ⴟ Product frame
ⴠ
Internal projector
External projector is designed in a size conveniently held and used with a hand, which can be stored in
a projector pocket nicely during no use. ⴝ External projector and
projector pocket
Buttons in a size that can be identified at a glance are easy to use and button descriptions cannot be
easily erased due to the use of special materials. In addition, the remote controller holder possible of
ÛURWDWLRQFDQEHXVHGFRQYHQLHQWO\LQDQ\GHVLUHGDQJOHE\WKHXVHU
ⴞ Remote controller and
its holder
Name Function
The connection for the power supply
on the main assembly and
the power input to the special heater
ⴘ
ⴠ Internal projector
ⴘ
The connection for the power supply on the main
assembly and the power input to the special heater
ⴝ
External projector and
projector pocket
ⴚ
Low frequency pad
ⴛ
Temperature setter for sub heater
ⴙ Sub heater
The power supply and signals are exchanged by connecting the power supply cable to both the
main mat and sub mat.
ⴜ Connector bay
ⴞ
Remote controller and its holder
ⴟ
Product frame
HIGH
LOW