background image

NM-­5000P

Before  the  Product  Installation

Before  the  Product  Installation

Avoid  using  the  product  in  a  closed  place  with  
any  fuel  and/or  chemical.

Otherwise,  it  might  cause  injuries  or  fire.

Move  the  product  after  separating  the  power  supply  
from  connecting  lines  if  the  product  is  moved.

Otherwise,  it  might  cause  electric  shock,  injury  and/or  
damage  to  the  product.

Connect  the  power  supply  after  connecting  the  remote  
controller  first.

Otherwise,  it  might  cause  damage  to  the  product.

Do  not  allow  any  child  to  use  the  product  alone.

Otherwise,  it  is  likely  that  injuries  occur.

Use  the  product  in  an  appropriate  range  of  
temperature  while  using  the  product.

Otherwise,  it  is  likely  to  cause  burns.

Prohibit  any  pregnant  woman  near  the  parturition,  
patients  with  rachischisis,  patients  wearing  a  
cardiac  pacemaker  and/or  patients  with  severe  
heart  diseases  from  using  the  product.

Otherwise,  it  is  likely  that  injuries  occur.

Install  the  product  in  a  flat  floor.

Otherwise,  it  might  damage  the  product.

Do  not  drop  or  shock  the  product.

Otherwise,  it  might  damage  the  product.

Check  out  the  applied  voltage  before  any  use.

Otherwise,  it  is  likely  that  the  electrical  shock  or  fire  occurs.

Do  not  place  any  inflammable  substance  on  the  product,  
such  as  candle  light  or  cigarette  light.

Otherwise,  it  is  likely  to  cause  the  electrical  shock  or  fire.

Turn  off  the  power  switch  during  no  use  for  a  long  time.

Otherwise,  it  is  likely  to  cause  fire.

Be  aware  of  dangers  that  you  might  fall  down  
when  you  get  on  or  off  the  product.

Otherwise,  it  is  likely  that  injuries  occur.

ࢴࡒ

࢒ѭ

ઃ˚̘

ࢲ࣬ર

ۼ̘

NU GA B ES T

60                60
50                50
40                40
30                30

Summary of Contents for NM-5000P

























Reviews: