background image

Before  any  A/S  Request

Product  Specifications  and  Performance

NM-­5000P

Caution

Ensure  checking  out  the  following  before  applying  for  A/S  if  any  abnormality  occurs  from  the  
product.

The  product  might  fail  to  operate  normally  even  without  any  failure  if  you  use  it  with  no  right  understand-­
ing  on  how  to  use  it.

Checklist  for  any  abnormality  on  the  remote  controller

  Turn  on  the  main  power  switch.

  Check  out  if  the  power  cord  is  accurately  connected.

  Check  out  if  the  fuse  inside  the  main  power  switch  is  disconnected.

  Check  out  if  other  operating  keys  are  pressed  on  the  remote  controller.

  Check  out  if  the  power  cord  is  accurately  connected.

  Connect  the  connector  for  the  remote  controller  again.

Do  not  disassemble  the  product  but  contact  your  nearest  supplier  or  
A/S  center.

Check  out  if  the  connector  for  the  low  frequency  pad  is  connected  accurately.

Checklist  for  operations  of  the  low  frequency  pad

Checklist  for  any  abnormality  on  the  internal  projector

If  various  indicator  lamps  on  the  

remote  controller  are  

not  operating;;

If  the  internal  projector  is  

not  operating;;

If  the  low  frequency  pad  is  

not  operating;;

If  you  see  a  warning  

message  "1E”;;

If  you  see  a  warning  

message  "3E”;;

Product  Specifications  and  Performance

This  product  is  a  medical  device.

It  is  a  safety  message  due  to  failure  in  the  heating  lamp  for  the  internal  
projector.

The  product  will  operate  if  you  replace  the  heating  lamp.
Do  not  disassemble  the  product  but  contact  your  nearest  supplier  or  A/S  center.

It  is  a  safety  message  due  to  failure  in  the  heating  lamp  for  the  external  
projector.

The  product  will  operate  if  you  replace  the  heating  lamp.
Do  not  disassemble  the  product  but  contact  your  nearest  supplier  or  A/S  center.

Combination  Stimulator  NM-­5000P

NUGA  MEDICAL  CO.,LTD.

Dongwha  Medical  Instrument  Complex,  1642-­10,  Dongwha  3-­Ri,  
Munmak-­Eup,  Wonju-­Si,  Gangwon-­Do,  Korea

No.  1478

Manufacturing  License  No.  10-­684

Marked  on  the  product

Main  box:  30kg  (±1.0kg)
Subsidiary  box:  12.5kg  (±1.0kg)
Product  frame  box:  37kg  (±1.0kg)

Main  mat:  565  X  1195  X  170mm  (±10mm)
Sub  mat:  570  X  810  X  150mm  (±10mm)
Product  frame:  1910  X  720  X  560mm  (±10mm)

Refer  to  the  user  manual

Refer  to  the  user  manual

Blood  circulation  improvements,  pain  relief

AC  220V~240V,  50/60Hz

230W

Degree  1  machine  &  BF  type  of  installation

Product  name  and  model  name

Manufacturer

License  number  of  

manufacturing  business

License  number  for  the  

manufacturing  article

Date  of  manufacture  /  

number  of  manufacture

Product  weight  (after  box  packing)

Product  size

Cautions  during  use

Performance  and  using  method

Use  purpose

Electric  rating

Power  consumption

Type  and  degree  of  

protection  for  electric  shocks

Summary of Contents for NM-5000P

























Reviews: